Author Topic: POTSWAP - General User Manual, Downloads, and Application Notes  (Read 2970 times)

CKnight28

  • Moderator
  • Jr. Member
  • *****
  • Posts: 50

The POTSwap allows landline telephones and modems to replace their POTS (plain old telephone service) connection with a wireless cellular connection. An internal landline modem allows legacy dial-up modem equipment to connect to remote TCP/IP networks. Fixed location voice applications can connect directly to the PSTN (Public Switched Telephone Network). Both dial-in and dial-out data and voice applications are supported.

An FXS connection (RJ11 jack) provides complete
Central Office emulation including dial tone, ringing and Busy signal generation as well as DTMF detection and generation. The POTSwap emulates all the functions of a wired telephone connection, is fully compatible with all common modem standards and can be configured to emulate international telephone line standards. Configuration of the POTSwap can be achieved via a local serial interface connection.
Wireless connectivity is provided by the Janus line of Plug-In Terminus modems which are available for a variety of wireless carriers. Support is available for GSM/GPRS, CDMA-1xRTT, EDGE, UMTS, HSPA+, EV-DO and LTE wireless networks.


User Manual/Documentation

POTSWAP Product Brief
POTSWAP User Manual


--------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------


Relevant Downloads
The latest firmware available for download for the POTSWAP.

POTSWAP Current Firmware
Firmware Revision History


--------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------


Application Notes
Here are application notes useful for evaluating/using the POTSWAP device.

Firmware Loading Instructions
« Last Edit: August 22, 2014, 07:43:05 PM by CKnight28 »