Author Topic: Unable to change baud rate  (Read 2227 times)


  • Newbie
  • *
  • Posts: 1
Unable to change baud rate
« on: October 27, 2015, 02:19:46 AM »
I am unable to change the baud rate using the AT+IPR command. For example, I issue the command
Code: [Select]
AT+IPR=19200<cr> and I do not get a response. I thought that perhaps I didn't get a response because the baud rate had changed but I am able to issue other commands (ie. AT<cr>) and get the OK response.  If I issue the
Code: [Select]
AT+IPR=115200<cr> command I get the OK response. Any help would be much appreciated.